Longer Filter Life. Cleaner Air. Greater Reliability.
In industrial air-handling systems, filter replacement is an important part of maintaining reliable air filtration. But how often do filters really need to be changed?
At one industrial facility operating three identical Air Handling Units (AHUs), a comparison between Camfil filters and the previous Sigma filter replacement cycle showed a notable difference in observed service life.
The Operating Environment
The facility's AHU system operates with 100% fresh air, with three filtration stages:
- Pre-filters
- Fine filters
- HEPA filters
The Camfil filters were installed in December 2025 and remained in operation through the end of August 2026 without replacement.
The assessment compared this observed service period with the facility's historical Sigma filter replacement intervals.
What Did the Comparison Show?
The historical replacement intervals and observed Camfil service life were:
| Filter stage | Previous Sigma service life | Camfil observed service life | Minimum improvement |
|---|---|---|---|
| Pre-filter | 6 months | At least 9 months | ≥1.5× |
| Fine filter | 4 months | At least 9 months | ≥2.25× |
| HEPA filter* | 3 months | At least 9 months | ≥3× |
The strongest comparison was seen in the HEPA stage: one Camfil filter remained in service for at least nine months, compared with a historical Sigma replacement interval of approximately three months.
No Camfil filter changeovers were recorded during the observation period.
Why Does Longer Filter Life Matter?
Longer observed service life can mean fewer planned filter replacement events. Depending on the operating conditions and maintenance practices, this may help reduce the frequency of replacement work and the associated maintenance effort.
However, filter life alone does not establish energy savings or prove that filtration performance remained unchanged. Those conclusions require additional evidence, including regular differential-pressure readings, actual operating airflow and comparable technical data for both filter brands.
The Takeaway
The preliminary assessment indicates that Camfil filters achieved longer observed service life than the facility's historical Sigma replacement cycles across all three filtration stages.
The minimum observed improvement was 1.5× for pre-filters, 2.25× for fine filters and 3× for the HEPA stage.
The results are based on the available service-life comparison for December 2025 to August 2026. Further validation of installation records, filter specifications, operating airflow and differential-pressure readings is needed before drawing broader conclusions about technical performance or total cost of ownership.
At Millstores Corporation, we believe reliable air filtration starts with choosing the right filtration solution and evaluating its performance under actual operating conditions.
*Note: The HEPA-stage grade is listed as EU 9 in the supplied report. The exact filter model, applicable standard and current classification should be technically verified before this is used as a formal HEPA performance claim. The assessment is preliminary and subject to validation of customer data.